Finding your IP address on each device
- Windows: open Command Prompt and type ipconfig. The IPv4 Address shown is your private address on the home network.
- Mac: System Settings → Network, then click the connected network to see its IP address.
- iPhone: Settings → Wi-Fi, then tap the ⓘ next to your network.
- Android: Settings → Network & internet → Internet, then tap your Wi-Fi network.
All of these show the private address your router gave the device. The address the rest of the internet sees is the public one at the top of this page, shared by every device on your Wi-Fi.
Public, private and router addresses
Your router has two addresses: a public one facing your internet provider and a private one facing your devices, usually 192.168.0.1, 192.168.1.1 or 10.0.0.1. Type that private address into a browser to open the router’s settings page. When a game, camera or remote desktop needs a port forwarded, the router passes outside connections arriving at the public address to the private address of the right device.
How accurate is IP location?
The country is right most of the time. The city is far less reliable, because providers register large blocks of addresses for a whole region, and mobile networks often route traffic through a hub in another city. A street address can’t be found from an IP address at all. If a website shows the wrong country, the database it uses may not have caught up with a reassigned block, and the provider can ask the database owner to correct it.
Checking that a VPN works
Note the address shown here with the VPN off, then connect and reload the page. The address, country and network name should all change to the VPN’s. Then run the leak test: if your home address or your provider’s name still appears anywhere, the VPN is leaking through WebRTC or through IPv6, which some VPNs don’t tunnel. Turning on the VPN’s leak protection, or switching off IPv6 on the device, usually fixes it.